0.96″ display,
in mono OLED or full-color TFT.
0.96″ is our highest-volume small display size — covering monochrome 128×64 PMOLED and full-color 80×160 TFT in the same footprint. We customize resolution, interface, color and mounting to fit your device.
PMOLED panel
Monochrome PMOLED or full-color TFT — same 0.96″ footprint
Both formats ship in the same diagonal size, so you can switch formats late in development without redesigning your housing.
PMOLED
The original 0.96″ solution — self-emissive, highest contrast, lowest power draw, and the widest operating temperature range.
- Displays 4 lines of Chinese or 8 lines of English text
- Driver IC: SSD1306, with some designs on SSD1315
- I2C or SPI interface
- Operating range: -40°C to +70°C
Color TFT
Higher resolution and full color bring richer content to the same 0.96″ footprint — icons, graphs and photo-like graphics.
- 262K colors on an RGB vertical-stripe panel
- Driver IC: ST7735S
- 8-bit 8080 MCU interface
- 400 cd/m² typical luminance, all-view viewing angle
0.96″ display specifications
Full electrical and mechanical specs for both formats — every parameter is open for OEM/ODM customization.
0.96″ PMOLED
Our earliest and highest-volume 0.96″ format — used across wearables, security tokens and medical wearables.
| OLED Size | 0.96 inch |
| Resolution | 128 × 64 |
| Pixel pitch | 0.17 × 0.17 mm |
| Active area | 21.744 × 10.864 mm |
| Module size | 26.70 × 19.26 × 1.45 mm |
| Interface | 8-bit 68XX/80XX parallel, 3-/4-wire SPI, I2C |
| Display colors | Yellow / White / Blue |
| Operating temp. | -40°C ~ +70°C |
| Storage temp. | -40°C ~ +85°C |
0.96″ Color TFT
Higher resolution and full color for devices that need richer, more detailed on-screen content.
| LCD Size | 0.96 inch |
| Display mode | Normally black |
| Resolution | 80(H)RGB × 160(V) |
| Pixel pitch | 0.135(H) × 0.1356(V) mm |
| Active area | 10.8(H) × 21.7(V) mm |
| Module size | 13.5(H) × 27.95(V) × 1.5(D) mm |
| Pixel arrangement | RGB vertical stripe |
| Interface | 8-bit 8080 MCU |
| Display colors | 262K colors |
| Drive IC | ST7735S |
| Luminance | 400 cd/m² (typ.) |
| Viewing direction | All view |
Common 0.96″ PMOLED colors
Self-emissive OLED pixels are available in single or dual-tone options.
White
Neutral, high-legibility option for general status and text display.
Blue
The most common single-tone option across consumer and industrial designs.
Yellow / Blue dual-tone
Yellow on top, blue below — used to visually separate header status from body content.
Where 0.96″ displays are already shipping
The same panel logic, adapted for the housing constraints of each device category.
Ready-to-mount 0.96″ modules
To simplify integration, our 0.96″ displays are also available as pre-assembled modules — wired and ready to drop into your design.
Soldered driver-board module
Panel pre-mounted on a driver PCB with indicator LEDs and a control button — drop straight into a finished-device design.
Pin-header breakout board
4-pin VCC/GND/SCL/SDA breakout with address-select pads — ideal for prototyping and low-volume builds.
How we take a 0.96″ display from spec to production
One point of contact, from the first drawing to the first mass-production shipment.
Share your requirements
Tell us your format (PMOLED or TFT), interface, color and mounting needs — or send an existing housing for us to design around.
Engineering & DFM review
Our engineering team returns a custom drawing in 2–7 days, with design-for-manufacture feedback on FPC, connector and cover lens.
Sample & validation
Samples are produced in 3–6 weeks and put through temperature, vibration and reliability testing before sign-off.
Mass production
Once validated, mass production runs 4–12 weeks depending on spec and volume, with flexible MOQ for new product launches.
Your 0.96″ display manufacturing partner
We’re a manufacturer, not a broker — engineering, tooling and production all happen in-house.
Manufacturing capacity
LCM units produced daily across our TFT panel cutting, glass washing, backlight and OLED assembly lines.
Fast development cycle
- Custom drawing: 2–7 days
- Sample production: 3–6 weeks
- Mass production: 4–12 weeks
In-house OEM/ODM
- Format, resolution & interface
- Driver IC & color options
- Module & housing design